HPLC and GC Methods for Determination of Lubricants and Their Evaluation in Analysis of Real Samples of Polyethylene

High performance liquid chromatography (HPLC) and gas chromatography (GC) are introduced for analysis of polymer lubricants (stearamide, oleamide and erucamide). In the HPLC method, a reverse phase octadecylsilane (ODS) column along with acetonitrile/methanol (60:40) as a mobile phase were used. Detection of analytes was performed by a UV detector at 202 nm. The analysis time was less than 8 min. In the GC method, polar capillary column and flame ionization detector (FID) were used for separations and detection, respectively. The analysis time by GC was longer than HPLC and was about 30 min. Limits of detection, linear range and repeatability of both methods are similar, but determination of oleamide in real samples by HPLC method is difficult due to complexity of the initial part of HPLC chromatogram in polyethylene samples. That problem is not observed in the GC method. Detection limits in both methods for all analytes are lower than 0.003% which are much lower than the amount of lubricants in commercial polymers (0.05–0.2%).     

An Accelerated Coordinate Gradient Descent Algorithm for Non-separable Composite Optimization

Journal of Optimization Theory and Applications - Coordinate descent algorithms are popular in machine learning and large-scale data analysis problems due to their low computational cost iterative...     

A Convenient Synthesis of Vinyl Sulfides

tert-Alkyl sulfides, with an α-(1H-benzotriazol-1-yl) group 6 and 13 , are readily prepared from N-[(aryl-thio)methyl]-1H-benzotriazoles 3 and N-( 11 ), respectively, by reaction with BuLi and then with the appropriate electrophile. The tert-alkyl sulfides 6 and 13 are smoothly converted by BF₃. OEt₂ into vinyl sulfides 5, 7 or 12 , respectively, in satisfactory yields.     

Enantioselective synthesis of nitroalkanes bearing all-carbon quaternary stereogenic centers through Cu-catalyzed asymmetric conjugate additions

The first examples of catalytic asymmetric conjugate addition (ACA) of alkylzinc reagents to trisubstituted nitroalkenes, leading to the formation of nitroalkanes bearing a quaternary carbon stereogenic center, are reported. Reactions are promoted in the presence of 4 mol % of a readily available amino acid-based phosphine and 2 mol % (CuOTf).C6H6. Cu-catalyzed reactions proceed efficiently in up to 98% ee and can be carried out with a variety of dialkylzinc reagents and trisubstituted nitroolefins. We highlight the synthetic utility of the products obtained by efficient conversion of optically enriched nitroalkanes to the corresponding carboxylic acids.     

Olefins turned alkylating agents: diastereoselective intramolecular Zr-catalyzed olefin alkylations

The first examples of intramolecular Zr-catalyzed electrophilic alkylation of aryl olefins are disclosed. Substituted carbo- and heterocycles are prepared efficiently and diastereoselectively.     

Copolyesterification between poly(butylene terephthalate), terephthalic acid and hydroquinone diacetate: a kinetic analysis

The kinetics of liquid crystalline copolyester synthesis via melt transesterification between poly(butylene terephthalate) (PBT), terephthalic acid (TA) and hydroquinone diacetate (HQDA) is examined. Two different copolyester compositions PBT30/(HQDA+TA) 70 and PBT 50/(HQDA+TA) 50 mol% ratio were synthesized. The ratio of HQDA to TA was kept constant for all the reactions.The copolyesters were synthesized via melt polycondensation route at 265°C, 275°C and 285°C using two different transesterification catalysts, zinc acetate and dibutyl tin oxide. A key postulation assumed in this work is that the reaction originates between TA and HQDA to form a dimer which slices PBT chain. The copolyesterification rate constant for a system containing butylene glycol a more nonpolar moiety compared to ethylene glycol in poly(ethylene terephthalate) has been determined. The activation energy values for the different copolymer systems has also been determined. The rate constants for the uncatalyzed and catalyzed copolyesterification reaction and the activation energy values for the reaction have been determined.     

Synthesis and characterization of [Cu(Phca2en)(PPh3)X] (X=Cl, Br, I, NCS, N3) complexes: crystal structures of [Cu(Phca2en)(PPh3)Br] and [Cu(Phca2en)(PPh3)I]

New mixed-ligand copper(I) complexes, [Cu(Phca₂en)(PPh₃)X], [Phca₂en = N,N′-bis(β-phenylci-nnamaldehyde)-1,2-diiminoethane and X=Cl (1), Br (2), I (3), NCS (4), N₃ (5)] have been synthesized and characterized by various techniques. ¹H and ¹³C-NMR and IR spectral data of these copper(I) complexes are compared with the free ligand to elucidate some structural features. The structures of [Cu(Phca₂en)(PPh₃)Br] (2) and [Cu(Phca₂en)(PPh₃)I] (3) have been determined from single-crystal data showing that the coordination geometry around copper atom is a distorted tetrahedron. Furthermore, these Cu(I) complexes exhibit supramolecular motifs of the type multiple phenyl embraces resulting from attractive interactions between phenyl rings of PPh₃ moieties. The presence of the C–H…Cu weak intramolecular hydrogen bonds, due to the trapping of C–H bonds in the vicinity of the metal atoms, is also reported.     

Ketoconazol‐Triiodide Ion Pair Complex as a Suitable Carrier in an Iodide Selective Membrane Electrode

A novel membrane sensor for selective monitoring of iodide, consisting of a triiodide‐ketoconazole ion pair complex dispersed in a PVC matrix, plasticized with a mixture of 2‐nitrophenyl octyl ether and dioctylphtalate with unique selectivity toward iodide ions, is described. The influence of membrane composition, pH of test solution and foreign ions on the electrode performance were investigated. The optimized membrane demonstrates a near‐Nernstian response for iodide ions over a wide linear range from 1.0 × 10^?2 to 1.0 × 10^?5 M, at 25 ± 1 °C. The electrode could be used over a wide pH range 3–10 and has the advantages of high selectivity, fast response time and good lifetime (over 4 months). It was successfully used as indicator electrode in potentiometric titrations and direct potentiometric assay of iodide ions.     

A simple colorimetric method for the assay of penicillin G salt and penicillamine by oxidation with iodate

A simple colorimetric procedure is described for determination of penicillin G salt and penicillamine. It is based on oxidation with potassium iodate at room temperature and measurement of the liberated iodine at 520 nm after extraction with carbon tetrachloride. Compared with other procedures, this method proved to be more rapid, highly reproducible and reasonably accurate. The relative standard deviation did not exceed 0.9% and 0.4% for penicillin and penicillamine, respectively. The procedure has been successfully applied to pharmaceutical preparations containing either of the two compounds.